Condensate Filtration

Specifications

Models: KCF 20 and KCF 100
Capacities: up to 500 scfm

The Kaeser Condensate Filter (KCF) is a convenient and economical way to handle contaminated compressor condensate in most small to midsize systems. The easily-removable cartridge separates the oil from the water. The water can be discharged into any municipal drain. After 4-6 months of use, the cartridge is then sent for proper disposal in the disposal bag provided.

Important features and advantages:

  • Compatible with most standard lubricants
  • Simple, reliable operation
  • Quick and easy filter cartridge changeout
  • No electricity required for operation
  • Multiple units connect together to handle larger systems
  • Multiple lines can be connected via optional manifold
  • Disposal bag provided with each cartridge

Condensate Management Products

Specifications

Model: Aquamat
Application: Oil/water separator for compressor condensate
Compressor capacities: 10 to 3180 cfm

Condensate is a by-product of all compressors. This oil/water mixture also contains particulates and hydrocarbons, and is concentrated during the compression process. Federal and local regulations prohibit discharging this contaminated water into surface drains and municipal water systems. Special handling and disposing of condensate in large volumes can be quite expensive.

The Aquamat system removes the oil and contaminants from the water, reducing the amount of contaminated condensate, and significantly saving on the disposal costs.

Important features and advantages:

  • Saves about 90% of disposal costs
  • SPays for itself in a short period of time
  • Includes test kit to simplify water quality testing
  • Level sensor indicates filter contamination level allowing planned filter changes
  • Quick and easy filter changes
  • Multiple condensate inlet lines for up to four compressors (Models Aquamat 2 and up)